Rating: 4.9 / 5 (3620 votes)
Downloads: 88981
>>>CLICK HERE TO DOWNLOAD<<<
40 supersedes en iso 1179- 1: english version connections for general use and fluid power - ports and stud ends with iso 228- 1 threads with elastomeric or metal- to- metal sealing - part 1: threaded ports ( iso 1179- 1: ) raccordements pour applications générales et. Last active version. Pdf, print or subscription. 3) see page n6 for o- ring and retaining ring ordering information. Why wait for paper? 2) 90 durometer nitrile is standard for hydraulic applications. 3) see page u30 for iso 9974. General technical iso— flat face port with british standard pipe, parallel ( bspp) threads ( din 3852, iso 228- 1, table t26 — port detail — isoconforms to proposed revision. 2) o- ring with retaining ring stud ends are not shown in iso 9974. Pdf or print version. Part 1: threaded ports raccordements pour applications générales et transmissions hydrauliques et pneumatiques — orifices et éléments mâles à filetage iso 228- 1 à joint en élastomère ou étanchéité métal sur métal — partie 1: orifices filetés reference number iso 1179- 1: ( e) pdf disclaimer this pdf file may contain embedded typefaces.
Iso 99 ed seal iso 99 non- adjustable o- ring with retaining ring 2) isoandport iso 99 cutting face seal dowty seal stud end for isoand isoports 1) see section o for o- rings and seals. Into a female bspp port ( iso 1179), however, the seal is cre- ated with one of the aforementioned sealing methods, not with the threads. It is also important to note that with these bspp threaded connections, the seal occurs on the port surface, or spotface, not in an o- ring gland or chamfer as sae and iso- 6149 straight thread do. Pdf, print or subscription. Ports in accordance with iso 1179- 1: are applicable for use with iso 1179‑ 2 heavy- duty ( s series) stud ends with type e sealing at working pressures up to 63 mpa ( 630 bar) and light- duty ( l series) stud ends at working pressures up to 25 mpa ( 250 bar), iso 1179‑ 3 light- duty ( l series) stud ends with type g sealing at working pressures up to. Power iso 1179 — ports and of stud ends following connections for general use and fluid — with iso 228‐ 1 threads with elastomeric or metal‐ to‐ metal sealing: — part 1: threaded ports — part 2: heavy‐ duty ( s series) and light‐ duty ( l series) stud ends with elastomeric sealing ( type e).
留言列表
